- SPU: AL-8XWF-ks55atb[5]
- Material:PVC
- Processing and customization: No
- Pattern: solid color
- Type: Positioning sticker
- Installation method: stick-on
Glue thickness: 25μm
Product composition: The surface layer is PVC film, the middle layer is transparent low-viscosity glue, and the bottom layer is release paper.
Paste environment: at 10- Indoor operation around 30℃
Features: High transparency, medium-low viscosity, no glue left
Scope of use: lettering transfer
How to use:
1. Transfer film products are suitable for cars and other smooth, clean surfaces.
2. Scrub the car surface clean.
3.Tear off the car sticker from the backing paper, and then spray water on the adhesive surface.
4. Flatten the car sticker and align it where you want to paste it.
5. After aligning the position, use a scraper to drive out the water and air bubbles.
6. After scraping the water dry, fix the car sticker with your hands, and then peel off the transfer film.
7. Wait 1- It takes 2 hours for the car sticker to be completely adhered firmly.