All products of our company can be shipped in one piece. If some products require multiple starting bids, you can remark just one, or you can leave a message to customer service.!

The remote control distance can reach about 800 meters in an environment without interference and obstruction. It can pass through walls, doors, windows, trees, etc. There is no direction restriction, but the distance will be shortened according to the actual environment.!

There are four functions to choose from:

1. Sound mode: Makes a beep sound to remind pets, recommended;

2. Vibration mode: The receiver vibrates to remind pets. The size of the vibration can be adjusted. It is recommended to use;

3.Electric shock mode: Shocking pets with static electricity provides a serious warning and will not harm pets. Pain is unavoidable and should only be used as a last resort.!( If long-haired dogs need to trim their lower neck hair, just cut a small amount to prevent the two conductive posts from touching the skin.)

4. Lighting mode: It is more convenient and safer to go out to walk your dog at night.

Product introduction:

1. Remote control material is ABS plastic, with rechargeable lithium battery, luminous blue screen, 1- 99 gears to adjust vibration and electric shock

2. The receiver is made of ABS plastic, with rechargeable lithium battery, IP7 degree waterproof, and can be worn for swimming.

3. Suitable for use by dogs of all sizes( It is recommended that the dog should be over 2 kg and have a neck circumference of 20- Within 70cm range)

Product parameters:

Remote control size:14* 4.5cm* 2.5cm

Receiver size:4*6* 3.5cm

collar size:15- 70cm adjustable

Packing box size:19*15* 5.3cm

Total product weight: One tow 0.3kg, one tow 0.38kg, one tow 0.46kg( Receiver 40g/ indivual)

The charging heads are available in American, European, British and Austrian specifications. Please note if you need to specify.

Product signal pairing:

1. First press on the remote control panel" CH" key, adjust it to CH1, there will be fonts displayed on the left side of the screen, then press" "Vibrate" button, there will be a corresponding vibration symbol displayed on the right side of the screen, press it again" +" or" -" and change the number to 00. Then press the on/off key of the receiver to turn it on. You will hear a beep sound when turning it on.( If it beeps twice, it means shutting down) , when the power is turned on, press and hold the power button for about two seconds. The indicator light will flash. Immediately press the button on the remote control." Vibrate" button, then the receiver will vibrate accordingly, indicating that the signal pairing is successful.( If the receiver does not respond, check which link caused the error and try again to configure the signal.)

2. If it is one to two or one to three, after equipping a receiver, then" CH" key to CH2 or CH3, follow the same operation as before to configure another receiver. After the signal is configured, you can press" CH" key to switch multiple receivers to control the corresponding dogs.

3. The remote control has no on/off key and will automatically enter standby mode when not in use. It will start up as long as you press any key.

Kind tips:

1. For the first time, charge the remote controller and receiver for at least 5 hours.;

2. When the remote controller is low on power, there will be a power display on the screen. When the receiver is low on power, the indicator light will turn on for about one second and off for one second.;

3. This product is a rechargeable electronic product. If the product is not used for a long time, it is recommended to charge it once a month so that the battery will be more durable.

This product can be used for one-to-one, one-to-two, and one-to-three( One remote control can train up to three dogs at the same time)

Packing quantity: 50 pieces/ Box, outer box size:35.5*52* 40.5cm, one tow net weight 15kg, gross weight 17kg