Kind tips: Bark stoppers will work for most dogs! There may be some individual dogs that do not respond to the anti-barking device due to thick skin, insensitivity or thick coat.! There are also dogs that are bold and have a strong temper. The more pain they feel, the more they bark.! If you usually punish it by hitting it a few times but it has no effect, it may not be ideal to stop barking.~ Therefore, the two metal pillars must be in contact with the dog’s skin, and they must bark three times in succession to have any effect.!

[ Name]: Adjustable sensitivity voice controlled bark stopper 

[ Function]: Humanely stop your dog from barking with increased sound and weak electric shocks

[ Product size]: 7cm* 3.8cm* 2.9cm( The maximum adjustable range of the collar strap: 50cm)

[ Product weight]: 136g/ indivual

[ Bag    Pack]:  white box

[ Color box specifications]:4.3*11.5* 18.5cm

[ Packing quantity]: 50 pieces/ box

[ Box size]:31.5*40* 41.5cm

  Instructions for use: After the battery is installed, it will make a long beeping sound and then stop, indicating that the anti-barking device is in working condition.! But the little red light won’t come on! blow in short, forceful breaths! Blow into the small black hole between the two metal probes of the bark arrester, the small red light will light up, and you can hear a metal sound at the same time.~ , so it will only light up when working.! After using it for a period of time, the small red light will keep flashing. It may be that the battery is out of power. It is recommended that you replace it with a new one.!

  1. Customers who are starting to use the bark arrester, please be sure to carefully observe the dog's reaction to the bark arrester. If the dog barks more and more as the power becomes louder, please take off the bark arrester immediately and be sure to take it slowly. When training your dog, make sure it understands that it is forbidden to bark when wearing a bark suppressor. If it barks, it will be punished.! After all, the bark arrester is just a tool, and electrifying the dog is not the purpose. It is just a method of wearing the bark arrester to achieve the purpose of stopping the dog from barking.!!!

  2. If there are more than two customers, please do not wear a bark arrester on one or some dogs, because the barking of other dogs will also activate the function of the bark arrester, causing innocent dogs to be electrocuted.!!!

  3. If the owner goes out, try not to tighten the anti-barking collar too tightly to prevent the dog from bruising the skin when moving.!!!

<注意事项> — — — — — — — — — — — — — — — — — — — — — — — —

1. This collar is not a regular collar.

2. Do not let your dog bite the device on the collar to avoid damage.

3. This device cannot distinguish the function of environmental noise and may be affected by some special sounds.( Sound similar to dog barking) When starting up, this is a normal phenomenon.

4. When a new battery is installed in this device, the receiving sensitivity will be very high. As time goes by, the receiving sensitivity will also decrease as the voltage decreases.

5. This device is equipped with a receiving sensitivity adjustment switch. The user can adjust the gear to change the receiving sensitivity according to different situations.

6. This device is not waterproof and the product will be damaged if soaked in water.( Once water enters, please take out the battery and wait for the device to dry before using it. If you want to bathe your dog, please remove the device.