$7.00 | Automatic Temperature Control White cabbage machine T12 lead-free soldering iron tip for mobile phone repair welding soldering head I mouth B mouth wholesale

Automatic Temperature Control White cabbage machine T12 lead-free soldering iron tip for mobile phone repair welding soldering head I mouth B mouth wholesale

$7.00

sales volume: 4

classification: Family life , Other

size

Free Size

number

Buy now

SPU: AL-3ZRB-7m11ed5k[A4]
Model: T12-K (Blade Tip)
Model: T12-KU (Small Blade Tip)
Model: 12-KF (Extended and Thick Blade Tip)
Model: 12-KR (Short Blade Tip)
Model: T12-B (Conical)
Model: T12-B2 (Conical)
Model: T12-BL (Sharp Tip)
Model: T12-I (Sharp Tip)
Model: T12-ILS (Extra Sharp Tip)
Model: T12-JL02 (Extended Curved Sharp Tip)
Model: T12-J02 (Curved Round Tip)
Model: T12-C1 (Fine Long Shoe)
Model: T12-BC1 (Small Shoe)
Model: T12-BC1.5 (Shoe)
Model: T12-BC2 (Shoe)
Model: T12-BC3 (Medium Shoe)
Model: T12-C4 (Large Shoe)
Model: T12-D12 (Flat Tip)
Model: T12-D16 (Flat Tip)
Model: T12-D4 (Flat Tip)
Material: Purple Copper
Type: Lead-Free Soldering Tip
Soldering Tip Shape: Blade
Soldering Tip Length: 15
Applicable Range: 942BK-950T12-D12T12-BL
Temperature Adjustment Range: 200-500
Maximum Power: 150
Soldering Tip (Tip) Length: 15
Soldering Tip (Tip) Shape: Blade
Soldering Tip (Tip) Diameter: 4.7
Specification: T12-KT12-KUT12-KFT12-KRT12-D12
Series: T12

T12烙鐵頭的特點是：傳感器充分前置，對溫度變化敏感度高；發熱芯部件安裝在小體積的烙鐵頭內部，熱量損失極小。兩大特點成就了T12烙鐵頭超凡的升溫能力，真正實現了350度低溫無鉛焊接的流暢性。

新T12烙鐵頭的使用注意事項

1、新烙鐵在使用前的防護處理：新烙鐵頭不能拿來就用，必須先對烙鐵頭進行防護處理後使用，就是說在使用前先給烙鐵頭上一層焊錫。具體的方法是：首先接上電源，當烙鐵頭溫度升至能熔錫時，立刻往烙鐵頭用錫線上厚一點的錫，而且要上滿整個工作面，絕對不能插電後把烙鐵放在哪裡長時間（超過5分鐘）干燒，否則烙鐵頭會被燒黑氧化上不了錫，或產生「吃錫」困難的現象，俗稱「燒死」，萬一出現這種狀況，可先把烙鐵斷電，讓烙鐵頭冷卻下來，然後用銼刀或者砂布或者清潔鋼絲球，把黑色的氧化層去掉，露出金屬白色，切忌不可打磨太狠，減少烙鐵頭的壽命，然後插電，並把頭部沾一層助焊膏，同時用錫線上錫，隨着溫度的上升，錫線熔化，覆蓋整個工作面。（上錫溫度200-250度左右）這樣的過程一次

不行就再重複幾次，直至整個工作面都布滿錫。

2、焊接集成電路與晶體管時，烙鐵頭的溫度就不能太高，且時間不能過長

3、用開的烙鐵頭也不能長時間通電而不使用，因為這樣容易使電烙鐵芯加速氧化而燒斷，同時將使烙鐵頭因長時間加熱而氧化，甚至燒「死」不再「吃錫」。

4、DIY時更換烙鐵頭時要注意引線不要接錯極性，比對原來連接線顏色進行更換，絕不可以接錯線，造成烙鐵頭燒紅，甚至發熱芯燒斷的事故。

5、烙鐵頭在焊接時，最好選用松香型焊劑，以保護烙鐵頭不被腐蝕。烙鐵應放在烙鐵架上。應輕拿輕放，決不要將烙鐵上的錫亂甩。平時不用烙鐵的時候，要讓烙鐵嘴上保持有一定量的錫，不可把烙鐵嘴在海棉上清潔後存放於烙鐵架上；

6、海棉需保持有一定量水份，但不可以有明水；

7、拿起烙鐵開始使用時，需清潔烙鐵嘴，但在使用過程中儘量減少使用海棉的次數。

8、用吸錫器時，若尚有錫提取困難，可再加一些錫上去（因錫絲中含有助焊劑），就可以輕鬆地提取多的錫下來了；

9、烙鐵頭溫度在350~380度之間為比較好的焊接溫度，可以滿足絕大多少的焊接要求

10、每天用完後，先清潔，再加足錫，然後馬上切斷電源。

After sales information

Within 15 days from the date of receipt, customers can be provided with an unconditional return service. The application for return of goods requires the consent of the merchant in the store.

Procurement and delivery

Delivery time: For products in stock, they will be shipped within 3 working days (excluding holidays) after you place your order and make payment. You will receive our notification after shipment.

payment

Credit card payment (quick payment) is a new payment method jointly launched by third-party payment platforms and major banks. It is one of the safest and easiest payment methods. Users do not need to activate online banking in advance, they can complete quick payments by entering information such as card face and mobile phone dynamic password. Quick payment allows various bank card users to conveniently make online payments without the need for special online banking activation.

No data available