Use a repair pen to restore small scratches and corrosion to 90% The above effects. Instructions for use( The following processing steps are for reference only and are suitable for situations where the repair area is not very large.):
1. Cleaning: Use soapy water or other supplies to clean the scratched area and then dry it.
2. Shake well: Please shake the product well before use( Shake up and down about 40-50 times) .
3. Paint: First, choose the right shaver( Draw) Use a pen to fill in the scarred area, and apply it repeatedly every 5 minutes until it is partially above the plane of the original car paint.
4, sandpaper: After the painted area dries for 2-3 days, during( Machine car washing is prohibited) , Soak 2000#/3000# sandpaper in soapy water for 20-30 minutes to make it soft.
5. Water grinding: After the paint is dry, water grinding can be carried out, and sandpaper soaked in advance can be used to polish in the same direction until the original car paint surface is equal.
6. Confirm the grinding position: Observe the grinding area with the naked eye. *Remember not to use excessive force to avoid damaging the original paint.
7, grinding: Use abrasive wax, spread it on the cloth, and grind it like a circle.
8, final confirmation: If the car paint surface is uneven after grinding, you can get better results by repeating the grinding process.
9. Waxing: Apply polishing wax on a dry cloth. Apply the polishing wax in a clockwise direction. After the wax dries for about a minute, wipe it clockwise with a towel or cloth.

[ Precautions]

●Thoroughly clean the surface to be repaired before repairing;
●Moisture, oil and rust stains are the main reasons for repair failure. Please clean the scratched area carefully and dry it; For cars that have been waxed or coated recently, it is recommended to use alcohol to clean off the wax film to be repaired to increase the adhesion of the paint film.
●For uneven scars on the bumper, you can first use sandpaper to polish them or use a knife to smooth them to make the repair effect even better.
●Paint precipitation will affect use. Shake the paint touch-up pen fully before repairing, and shake it more than 30 times when you hear the sound of marbles hitting.
●Open the cap of the paint touch-up pen upright. Do not open it in a horizontal position to avoid paint spillage.
●For deeper scars, you can use the included brush to apply it several times first( Interval 2- 3 minutes) .
●The repaired area painted directly with a touch-up pen will be a little uneven. Wait for 2 days.- After the paint film is dry for 3 days, use 2000# The effect will be better if the sand is soaked in water and smoothed.
●The sprinkler irrigation combination is repaired by a professional spray painting process. After repair, the surface will be smooth and there is no need to use sandpaper to grind it again. The 400 that comes with the sprinkler irrigation# ,800# Sandpaper is used to mark the early stages of scars before repairing.